Online Service

Online Service

Contact Person
13790329348
WeChat QR Code
Latest company news about Die Spring FAQ: Selection, Breakage, Service Life & Custom Order

November 12, 2026

Die Spring FAQ: Selection, Breakage, Service Life & Custom Order

Die Spring FAQ: Selection, Breakage, Service Life & Custom Order

We receive frequent inquiries from global mold engineers about die spring selection, service life, breakage and custom lead time. This FAQ guide helps designers pick suitable springs and reduce mold trial failure, spring fracture and mass-production defects.

Q1: What do different colors of die springs mean?

Standard rectangular die springs are color-coded by load class: yellow (light load), blue (light-medium load), red (medium load), green (heavy load), brown (extra heavy load). Each color has a maximum allowable compression ratio. Many buyers only select by outer diameter and free length without checking compression limits, which leads to early breakage in mass production.

Q2: What causes die spring breakage?

Over-compression is the top reason. Other factors include impure raw wire, inconsistent heat treatment hardness, surface decarburization, eccentric installation, and using ordinary springs under high-temperature conditions. We carry out crack detection and fatigue sampling before delivery and remind customers of operating limits.

Q3: Can you make custom springs and what is the MOQ?

 We specialize in die springs with full custom capability beyond standard catalog items. Custom options cover special OD, free length, spring rate, ground ends, high-temperature and anti-corrosion grades. Small-batch sampling is available, and mass production can start after sample approval, ideal for mold R&D and new product trials.

Q4: Lead time and certification documents?

Standard stock items ship within 3–7 days. Custom orders follow production schedules. Material test certificates and dimension inspection reports can be supplied for customs clearance and incoming quality inspection.

Tip for mold engineers: share your stroke, preload, cavity size and working temperature when you send an inquiry. Our technical team will verify specifications to minimize failure risk and improve mold stability.