JIS Standard Heavy Load Stainless Steel Mold Spring for Industrial Die Spring Applications
20mm OD Compression Springs
,Industrial 10mm ID Compression Spring
,Customizable Helical Compression Springs
MOLD SPRING - JIS Red Heavy-Load Stainless Steel Die Springs
Thick stock does not strip itself. On heavy blanking the stripper must overcome a work-hardened slug on every stroke, and a light spring gives up: the part stays in the die, the plate tilts, and the next hit damages the punch. Red is the heavy-load class in the JIS range.
Why this red JIS die spring
- Heavy load class: the highest force in the standard range at a given installed height, built for thick stock and high stripping force.
- JIS dimensions, drop-in fit: outer diameter, free length and installed height follow the JIS series used in Japanese tooling, so a replacement drops into the existing pocket.
- Rectangular wire, ground flat ends, pre-set: more force per millimetre than round wire, and free length holds under heavy cycling.
- Stainless steel body: resists rust in humid tool rooms, after wash-down, and in food, medical and cleanroom moulding.
- OEM sizes to drawing: non-standard diameters and free lengths made from your drawing, sample or Japanese part number.
When red is right, and when it is not
Red suits thick stock, high-tonnage presses and high stroke rates. It is wrong for thin or cosmetic parts: the extra force marks the surface and bows a light plate. If the tool was built around blue, do not jump to red to fix a stripping problem: check punch and die clearance, lubrication and slug build-up first, because a heavier spring only masks the fault.
Specifications
| Item | Detail |
|---|---|
| Material | stainless steel, rectangular-section wire |
| Standard | JIS dimensional series |
| Load class | red, heavy load |
| Sizes | metric JIS sizes; custom to drawing |
| Ends | closed and ground flat |
| Packing | export carton, anti-rust bag |
Installation and care
- Confirm the stripper and backing plates are thick enough; a thin plate flexes and the spring rubs.
- Check hole and rod clearance against the JIS table; a spring rubbing the bore loses force and fails early.
- Never compress beyond the maximum deflection for the size; over-travel collapses it faster than a light spring.
- Replace as a matched set and keep the bore lightly lubricated.
Shipping and returns
- Samples accepted so you can confirm force and fit first.
- Load class, size and quantity confirmed on the quote; lead time given per order.
- Any deviation from the confirmed drawing is replaced at our cost.
Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible