Online Service

Online Service

Contact Person
13790329348
WeChat QR Code
Quality JIS Standard Mold Spring and Die Spring in Alloy Steel with 5 Colour-Coded Load Classes factory
<
Quality JIS Standard Mold Spring and Die Spring in Alloy Steel with 5 Colour-Coded Load Classes factory
Quality JIS Standard Mold Spring and Die Spring in Alloy Steel with 5 Colour-Coded Load Classes factory
>

JIS Standard Mold Spring and Die Spring in Alloy Steel with 5 Colour-Coded Load Classes

Specifications
Highlight:

Engine Assembly Round Wire Spring

,

Spiral 25 lb Load Compression Springs

,

2.5mm Extended Length Compression Springs

Material:
Alloy Steel
Wire Diameter:
2.5mm
Inner Diameter:
2.5mm
Outer Diameter:
2.5mm
Extended Length:
2.5mm
Load Capacity:
25 Lb
Key Attributes
Brand Name: Yuanbang
Model Number: YB-0000
Place of Origin: Guangdong, China
Minimum Order Quantity: 10
Price: €0.2356-0.7677
Product Description

MOLD SPRING - Stainless Steel Die Springs for High-Load Press Tools

In a press tool running hundreds of thousands of strokes, the spring decides whether the stripper plate stays level and the die stays aligned. These MOLD SPRING compression springs are wound from rectangular-section stainless steel wire, ground flat at both ends and pre-set, so free length stays stable across the full service life.

Why toolmakers specify these die springs

  • High force in a compact stack: rectangular wire packs more material into the same cavity than round wire, lifting the load per millimetre of installed height.
  • Stainless steel body: resists rust in humid tool rooms, after wash-down, and in food, medical and cleanroom moulding.
  • Drop-in standard sizes: made to ISO, JIS and DIN dimensional series in metric and inch sizes, so they replace the springs already in your die set.
  • Colour-coded load classes: yellow, blue, red and green mark light, medium, heavy and extra-heavy ratings, so a technician can match a replacement without a datasheet.
  • OEM sizes to drawing: non-standard diameters, free lengths and spring rates are produced from your drawing or sample.

Specifications

  • Material: stainless steel, rectangular-section wire
  • Standards: ISO / JIS / DIN dimensional series
  • Load classes: light, medium, heavy, extra-heavy (colour coded)
  • Sizes: metric and inch; custom sizes to drawing
  • Ends: closed and ground flat
  • Finish: pre-set, stress relieved
  • Packing: export carton, anti-rust bag

Installation and care

  • Check hole and rod clearance before fitting: a spring that rubs the bore or binds on the rod loses load and fails early.
  • Never compress beyond the maximum deflection for the size; over-travel is the most common cause of a collapsed die spring.
  • Keep the bore lightly lubricated and free of swarf, and replace springs as a matched set so the stripper plate stays parallel.
  • Store upright, away from direct sunlight and humidity, to protect free length.

Shipping and returns

  • Samples and small trial orders are accepted so you can validate fit and load before a production run.
  • Size, load class and quantity are confirmed on the quote; lead time is given per order.
  • Any dimensional or load deviation from the confirmed drawing is replaced at our cost.

Specification
item value
material Alloy Steel
usage Industrial
model number YB-0000
place of origin China
style Coil
brand name Yuanbang
Coil Inner Diameter Id 2.5mm
Coil Outer Diameter Od 2.5mm
Extended length 2.5mm
Helical Direction Left and right
Wire Diameter 2.5mm
Company Introduction

The company was established in 2015. Currently, the factory covers an area of over 8,000 square meters. It specializes in the production of mold springs. Standard parts are in sufficient supply and can be dispatched within 24 hours. Non-standard parts can be customized based on provided drawings or samples. Round wire springs, torsion springs, compression springs and so on can all be produced, with complete certificates

FAQ

1. who are we?
We are based in Guangdong, China, start from 2015,sell to North America(22.00%),South America(15.00%),Eastern Europe(10.00%),Central America(8.00%),Domestic Market(7.00%),Northern Europe(7.00%),Oceania(7.00%),Mid East(6.00%),South Asia(5.00%),Eastern Asia(3.00%),Southeast Asia(3.00%),Western Europe(3.00%),Southern Europe(2.00%),Africa(2.00%). There are total about 51-100 people in our office.

2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3.what can you buy from us?
Spring,Mold spring,Circular wire spring,Flat wire spring,Customizable spring

4. why should you buy from us not from other suppliers?
Dongguan Yuanbang Spring Co., LTD., covering an area of 8,000 square meters, specializes in the production of mold springs. Standard parts are in sufficient supply and can be dispatched within 24 hours. Non-standard parts can be customized based on provide

5. what services can we provide?
Accepted Delivery Terms: -;
Accepted Payment Currency: -;
Accepted Payment Type: -;
Language Spoken: -

Related Products
Request A Quote

Please Use Our Online Inquiry Contact Form Below If You Have Any Questions, Our Team Will Get Back To You As Soon As Possible

You Can Upload Up To 5 Files And Each File Sized 10M Max